| Basic Vehicle Parameters | Drive Type | 4X2 | |
| Total Mass (kg) | 12900 | ||
| Curb Mass (kg) | 6550 | ||
| Vehicle Appearance Parameters | Length (mm) | 7290 | |
| Width (mm) | 2310 | ||
| Height (mm) | 3250 | ||
| Wheelbase (mm) | 3800 | ||
| Performance Parameters | Maximum Speed (km/h) | 89 | |
| Maximum Climbing Grade | 30% | ||
| Chassis Configuration Parameters | Engine | Engine Emission Standard | Euro II, III, IV, V, VI |
| Manufacturer | Guangxi Yuchai Machinery Co., Ltd./Kunming Yunnei Power Co., Ltd. | ||
| Displacement (L) | 3-4.2L | ||
| Rated Power (kw) | 132-147 | ||
| Chassis Configuration Parameters | Cab | Type | Double row flat top cab |
| Model | T3 (1995) (1.995M Wide) | ||
| Standard Configuration | Bluetooth Retractable Player, Driver Airbag Seats, Laminated Glass, Electric Doors And Windows, Wide Bumper, Central Locking, Multi-Function Steering Wheel,LED daytime running lights | ||
| Transmission | Gearbox Type | Manual, 8 gears | |
| Double Front Axle | Type | Drum Brake | |
| Loadable Mass (Kg) | 2700 | ||
| Double Rear Axle | Type | Drum Brake | |
| Loadable Mass (Kg) | 7000 | ||
| Speed Ratio | 4.875 | ||
| Chassis Configuration Parameters | Frame | Cross-Sectional Dimensions (mm) | 230×65×(6.5+5) |
| Leaf Springs | Number Of Pieces | Front Spring 8 Pieces, Rear Spring 11+8 Pieces | |
| Tires | Type | Wire Tire | |
| Quantity | 6+1 | ||
| Model | 8.25R20-16 | ||
| Steering System | Type | Adopt A Hydraulic Power Steering System | |
| Braking System | Brake Type | Drum Brake, With ABS Anti-Lock Braking System | |
| Service Brake System Type | Dual Circuit Air Brake | ||
| Parking Brake System Type | Spring Break | ||
| Parking Control Type | Hand Brake Operation | ||
| Electrical System | System Voltage | 24V | |
| Battery | 100AH Dual Battery | ||
| Top Configuration Parameters | Cargo Box | Volume (M³) | 6 |
| Material | Q235 | ||
| Unloading Speed (M³/Min) | ≥1 | ||
| Other Configuration | Triangular Warning Sign, Tool Kit, Spare Tire At The Rear Of The Frame, ABS, Air Conditioning, Front Lower Protection, Sun Visor. | ||
| Install configuration parameters | Tanks | Capacity (m ³) | 6 |
| Material | High quality Q235 carbon steel with a thickness of 3-5mm (with high-tech anti-corrosion treatment inside) | ||
| Tank configuration | Manhole: 1 DN500 manhole with quick locking/opening device | ||
| Overflow port: Install one DN65 overflow port | |||
| Drain outlet: Install one DN40 water tank drain outlet, equipped with a ball valve | |||
| Water inlet: Connect one DN65 interface on each side of the water tank | |||
| Inlet and outlet: Install 1 water tank to water pump inlet pipe, DN125 valve, manual control, install 1 water pump to water tank filling pipe, DN65 valve, manual control | |||
| Equipment box | structure | The main frame structure is welded with high-quality square tubes, and the outer decorative panels are welded with carbon steel plates. The roof is non slip and can be walked on | |
| Equipment box | The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling shutter doors on both sides and lighting inside. Storage boxes shall be installed in the equipment compartment according to demand. The side lower skirt is equipped with a toolbox and a rolling shutter door, which can hold small tools | ||
| Pump house | The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutter doors on both sides and the rear. There are lighting fixtures inside, and some commonly used equipment can be placed on both sides of the pump room | ||
| Climbing stairs and boarding handles | The rear ladder adopts an aluminum alloy double section flip ladder, with a ground clearance of no more than 350mm during use. The upper handle is made of anti slip round steel pipe with grooves on the surface, and the surface is sprayed with plastic treatment | ||
| water pump | Model | CB10/40 type atmospheric pressure vehicle fire pump | |
| Form | Low pressure centrifugal type | ||
| Rated flow rate | 40L/s @1.0MPa | ||
| Rated export pressure | 1.0MPa | ||
| Maximum suction depth | 7m | ||
| Priming device | Vacuum piston pump | ||
| Water intake time | Maximum suction depth ≤ 50s | ||
| pipe system | Pipe Material | High quality seamless steel pipe | |
| Water suction pipeline | A DN125 suction port is installed behind the pump room | ||
| Water injection pipeline | There are two DN65 water injection ports on each side of the water tank, and one DN65 water pump is installed in the pump room to inject water into the tank pipeline | ||
| Water outlet pipeline | One DN80 atmospheric pressure outlet with valve is installed on each side of the pump room | ||
| Cooling water pipeline | Cooling water pipeline and control valve equipped with cooling power take-off | ||
| Vehicle mounted fire water cannon | Model | PS8/40W fire monitor | |
| Manufacturer | Chengdu West Fire Machinery Co., Ltd | ||
| Rated flow rate | 40L/S | ||
| Rated pressure | 0.8MPa | ||
| Elevation | ≥70° | ||
| Angle of depression | ≤-45° | ||
| Range (m) | water:≥65m | ||
| Horizontal rotation angle | ≥360° | ||
Fire Truck
HARMAC
HARMAC 4X2 Fire Truck Equipped with a 6000-liter Water Tank
Model: HMF5320GXF
Reliable Fire Fighting Vehicles for Municipal, Industrial, Airport, and Emergency Rescue Applications. Available in Water Tank, Foam, Rescue, and Custom Configurations.
Brand
HARMAC
Warranty
3 Years
ISO CE Certified
Worldwide Shipping
Strict QC
Request a Quote
Get pricing & availability within 24h
YOU MAY ALSO LIKE
